bannerny
Concrete curing heating cable
- Apr. 01,2019

In the pursuit of excellence in the construction of residential buildings and other structures, while increasing the efficiency of production facilities, the latest technologies are actively used. One of these technical solutions is the use of heating cables, the laying and connection of which can be done by hand.


In the construction of any objects, a high-quality foundation, on which a building or house stands, is of paramount importance. Usually, concrete mixes are used to fill the foundation or slab. In order for buildings to withstand any loads on the foundation in the future, you need to use a mixture of excellent quality for it. The foundation itself should be ready for the erection of walls and subsequent ceilings above it, that is, it is necessary to wait a certain period in order for the concrete to harden to complete. How does this process take place, how long does it take and can hardening be accelerated?



At high temperatures and air humidity, hardening is faster, and at low temperatures it slows down. Exposure to zero and negative air temperatures can stop the setting process. The optimum temperature for solidification is 20-30 degrees above zero, the humidity should not be lower than 90%. Under laboratory conditions, it was found that hardening occurs most actively under the described conditions in the first week after pouring. During this period, concrete can gain up to 70% of its strength. 100% brand strength reaches 28 days after casting.


In real conditions, the air temperature cannot be constant: it is higher during the day, it decreases at night, and the humidity also changes at different times of the day. Therefore, experts recommend to wait with the erection of buildings on the ground a few more days. Thus, it is possible to continue construction work no earlier than a month after pouring.


28 days is the control time for the concrete to set. But in some cases it is necessary for the concrete setting process to proceed faster. This applies to work carried out in the winter, or the necessary removal of objects in the early stages. For such cases, you can speed up the process of solidification tenfold. Since concrete matures faster at high temperatures and humidity, electrical heating cables may be used for drying and hardening of concrete in new buildings. Hardening usually takes 28 days, depending on climate and temperature. By installing heating cables this time can be reduced.

HRBHS is a underfloor heating cable for curing and drying concrete, as well as heating. The system speeds up concrete curing and enables faster formwork dismantling. The heating cable, which is fixed to the reinforcement, can be reconnected at a later stage for effective drying or heating. With HRBHS concrete curing cables, you have a smart and energy-efficient way of curing quickly and being able to dismantle formwork quickly even in temperatures below zero.



The HRBHS in-concrete heating cable can be used in humid places. Multi-layer XLPE material, the mechanical strength of the product can reach class. M2, and will not be deformed in short-term exposure up to 150°C. And the cable is prepared with plug, ready for use.



The principle of operation, as well as the simplicity and versatility of the heating cable opens up wide spaces for its use. If you want to know more about the use of heating cable, please contact with us: http://www.chinaheatingcable.com/

kontaktiere uns jetzt

Onlineservice

+86-551-67709531

+86 136 3569 0401

hinterlass eine Nachricht

Anhui Huanrui

    Wenn Sie Fragen oder Vorschläge haben, lassen Sie uns bitte eine Mitteilung, wir antworten Ihnen, sobald wir können!